|
TLE Series
|
|
Innovative Technology & Best-in-Class Efficiency The TLE Series UPS brings
the latest power conversion technology to the marketplace, using a three-level inverter
design and a multi-mode architecture that makes real time decisions between premium
protection mode and premium efficiency mode. The TLE Series UPS was developed using
GE's Design for Six Sigma (DFSS) methodology to ensure that the product meets customer
requirements for reliability and quality.
Features:
- Highly reliable and efficient tri-level conversion
- Automatic or manual multi-mode generation
- Up to 99% premium efficiency mode (filtered eBoost)
- Up to 97% premium protection mode (double conversion)
- Unity (1.0) Output Power Factor
- High (0.99) Input Power Factor
- Less than 5% Input Current Harmonic Distortion
- Small footprint
- Front access only design for maintenance
- "Cable saver" design to allow +/- 25% differential of cable lengths
between UPS modules and the output parallel
|
|
TLE Series 30-40 CE UPS is one of the best performing three-phase UPS systems
providing critical power protection for a wide range of applications. The TLE Series
operates in VFI mode (Voltage Frequency Independent) and has been developed to satisfy
the growing request of high efficiency through an innovative control algorithm using
3-level inverter technology.
The TLE Series UPS provides industry-leading reliability, efficiency, clean input
performance and unity power factor at the output. Reliability & power can be further
increased by paralleling more units utilizing GE’s unique RPA™ (Redundant Parallel
Architecture) technology.
Through their complete life cycle, all GE UPS systems are fully supported by service
teams which provide world-class, 24x7 preventive and corrective services, training
and application expertise.
Features:
- 1 x 40kW Power Block
- Up to 35mins internal batteries (75% load) or Tx’s / local modifications
- Capable of 6 units in RPA to 240kW
- Built in static & maintenance bypass
- Ventilation Front to Top
- Can be positioned against rear and side walls
- Easy termination points Middle – Rear
- Long Design life of 12 years plus
- Delivered on Wheels for easy movement
- Common Battery up to 3 units
- External Transformer Enclosures
- Frequency Converter / Conditioner Mode (no batteries)
- Backfeed Protection
- Blackbox – Intelligent Diagnostics
|
|
TLE Series 40-120 Scalable CE UPS is one of the best performing three-phase
UPS systems providing critical power protection for a wide range of applications.
The TLE Scalable series operates in VFI mode (Voltage Frequency Independent) and
has been developed to satisfy the growing request of high efficiency through an
innovative control algorithm using 3-level inverter technology.
The TLE Scalable series UPS provides industry-leading reliability, efficiency, clean
input performance and unity power factor at the output with the ability to scale
from 40kW to 120kW vertically. Reliability & power can be further increased by paralleling
more units utilizing GE’s unique RPA™ (Redundant Parallel Architecture) technology.
Through their complete life cycle, all GE UPS systems are fully supported by service
teams which provide world-class, 24x7 preventive and corrective services, training
and application expertise.
Features & Benefits:
- Scalable using 40kW Power Block to 120kW
- Capable of 6 units in RPA to 720kW
- Ventilation Front to Top
- Built in static & maintenance bypass
- Can be positioned against rear and side walls
- Easy termination point at the front bottom
- Long Design life of 12 years plus
- Common Battery up to 3 units
- External Transformer Enclosures
- Frequency Converter / Conditioner Mode (no batteries)
- Backfeed Protection
- Blackbox – Intelligent Diagnostics
|
|
Delivering Best-in-Class Efficiency
GE's TLE Series UPS is one of the most efficient and reliable three-phase UPS systems,
providing best-in-class efficiency, output performance and critical power protection
for your data center needs. The TLE Series UPS solutions are optimized to provide
high efficiency at part load conditions.
The TLE Series UPS helps assure low input current harmonic distortion, best-in-class
output voltage regulation and dynamic response. This helps customers save operational
costs while implementing environmentally-friendly solutions.
Features include:
- High efficiency in double conversion mode up to 96.5% and eBoost
mode operation up to 99%.
- High double conversion efficiency provides substantial life cycle
cost saving in power and cooling cost of up to $ 2 MM for a 6 MW data center.
- Clean input performance keeps the supply network clean and provides
advantages by reducing size of circuit breaker, cables and generator.
- True front access for operation and maintenance reduces mean time
to repair (MTTR)
- Built in back feed protection and maintenance switch minimize installation
cost and increase safety
- Smaller size reduced installation and operational foot print
- Redundant Parallel Architecture (RPA) for reliability, redundancy
and scalability up to 6 UPS
- Enhanced output performance with unit power factor to protect and
supply modern IT load
- Excellent dynamic performance and low output voltage distortion
- Improved diagnostic capabilities with waveform capture and capacitor
monitoring
|
SG Series
|
|
Delivering Best-in-Class Efficiency with eBoost Technology
The GE SG Series is one of the most efficient and reliable Three Phase UPS Systems,
providing best-in-class output performance and critical power protection for your
data center needs. The SG Series UPS solutions are designed and optimized to provide
high efficiency at part load conditions. The SG Series UPS assures low input current
harmonic distortion and best-in-class output voltage regulation and dynamic response.
This helps customers save operational costs while implementing environmentally-friendly
solutions.
Features include:
- Up to 99% operating efficiency with written efficiency guarantees
- eBoost operation minimizes efficiency losses providing annual power
& cooling savings up to $300k for 5MW data center
- eBoost line conditioning & voltage regulation via Bypass Inductor
patented design
- Innovative product technologies that boost efficiency, reliability
and lengthen battery life
- Top or bottom cable access
- Matching battery and maintenance bypass cabinet for easy configuration
- Front Maintainability Design reduces mean time to repair (MTTR)
- Scalable Solution
- Redundant Parallel Architecture (RPA) provides reliability, redundancy
and scalability
- Parallel up to 6 UPS Modules
- Long history of experience with Redundant Parallel Architecture
(RPA) which increases system reliability by eliminating single point of failures
|
|
Delivering Best-in-Class Efficiency with eBoost Technology
The GE SG Series is one of the most efficient and reliable Three Phase UPS Systems,
providing best-in- class output performance and critical power protection for your
data center needs. The SG Series UPS solutions are designed and optimized to provide
high efficiency at part load conditions.
The SG Series UPS assures low input current harmonic distortion and best-in-class
output voltage regulation and dynamic response. This helps customers save operational
costs while implementing environmentally-friendly solutions.
Features include:
- High efficiency in double conversion up to 94% and eBoost mode
of operation up to 99% provides substantial savings in direct and indirect energy
cost.
- eBoost*** operation minimizes efficiency losses providing annual
power & cooling savings up to $300k for 5MW data center
- PurePulse IGBT rectifier keeps your supply network clean and provides
advantages in installations by reducing size of circuit breaker, cables and generator.
- True front access for operation and maintenance, reduces mean time
to repair (MTTR)
- Smaller size reduced installation and operational foot print
- Redundant Parallel Architecture (RPA) provides reliability, redundancy
and scalability
- Parallel up to 6 UPS Modules
- Enhanced output performance to protect and supply modern IT load
with leading power factor (0.9) without derating
- Excellent dynamic performance and low output voltage distortion
- Inverter zig-zag isolation transformer provide better short circuit
capability and load galvanic separation
*** eBoost option is available on 160-500 kVA UPS model
|
LP33 Series
|
|
GE Critical Power’s LP33 Series II UPS is a robust, high performance UPS system
that provides power protection for a wide range of mission critical applications.
LP33 Series unit operates in double conversion mode with true continuous on-line
VFI (voltage and frequency independent) operation.
To achieve redundancy or to increase power capacity, GE's unique Redundant Parallel
Architecture (RPA) technology enables the LP33 to parallel up to four units.
RPA allows customer the flexibility to expand power by paralleling units, or the
system's reliability can be increased by adding redundant units to create a totally
redundant system eliminating single point of failure.
When sourcing a UPS from GE, you also get access to valuable services, such as solution
design, integration within networking environments, customization, 24x7 preventive
and corrective services, and training.
Features include:
- High Input Power Factor (>0.98) and low input THD distortion (<8%)
prevents disturbances to other electrical equipment, thus eliminating the need for
costly filters or oversized feeders.
- Output Power Factor at 0.90, matching the need of most critical
load requirements
- Transformerless design for compact footprint, easily transportable,
robustly designed system with low audible noise suitable for both office and industrial
environments.
- Utilizes high frequency PWM (Pulse Width Modulation) IGBT digital
control technique resulting in extremely low output distortion and fast transient
response eliminating the need for oversizing the UPS.
- Intelligent Energy Management in RPA Configuration and ECO-mode
for single module configuration provides automatic energy savings.
- Superior Battery Management (SBM) enhances battery lifetime resulting
in reduced cost of operation.
- Integrated internal manual maintenance bypass reducing the need
for external (larger footprint) equipment.
- Fully compliant with standards (cUL: UL1778; IEC 62040, ISO 9001)
- Internal batteries are standard and matching external battery cabinets
are available for extended runtime requirements
- Remote monitoring and management available with connections via
LAN, modem, SNMP, RS232, Modbus RTU, programmable alarm contacts, and TCP/IP.
- Transformerless design ensures smaller footprint and less weight
than transformer technology UPS modules.
- Overload capability @ 125% load on inverter = 10mins. and 150%=
1min.
- Overload capability @ 200% load on bypass = 2mins.
- Output voltage THD @ 100% non-linear load on inverter = <3%
- Output voltage THD @ 100% linear load = <2%
|
|
The GE LP 33 Series is a highly reliable and cost effective three phase UPS system
providing critical power protection for a wide range of applications. The LP 33
system operates in VFI mode (Voltage Frequency Independent) yielding the maximum
levels of power reliability for all mission-critical processes. The GE LP 33 was
developed using GE's Design for Six Sigma methodology to ensure that the product
fully meets customer requirements and expectations.
The unit is equipped with a redundant power supply ensuring the load being transferred
in an instant to the static bypass in the event of a breakdown of the power electronics.
To further increase system reliability, 2 or more units can be connected in parallel
using GE's unique redundant parallel architecture(RPA). In this way a redundant
fault tolerant system is created with maximum availability and reliability. The
decentralized bypass offers maximum flexibility to the end-user for future expansion
of the system.
Through their complete life cycle, all GE UPS systems are fully supported by service
teams which provide world-class, 24x7 preventive and corrective services, training
and application expertise.
Features include:
- GE's unique booster-technology provides a high input power factor
(0.98) and low input current harmonic distortion. The low input current harmonic
distortion is constant for al load situations from 20% to 100% load.
- Big savings can be achieved on energy costs due to the very high
efficiency of this UPS system: 93%, on ECO Mode up to 98.6%.
- Input/Output terminals are easily accessible from the front, as
well as all other serviceable parts. Full front access provides the possibility
to place the unit against a wall or in a "back to back" configuration, saving floor
space.
- EMC filters are standard installed in the UPS making sure that
the system complies also with the future standards on emission of radio frequencies.
The LP 33 Series complies with EN 62040 Class A ensuring compatibility in any environment.
- The footprint of the LP 33 Series is compact. Combined with low
weight it can be placed on any floor. The small footprint provides you with more
space for other equipment.
|